Save $30.00
Roll over image to zoom in
Tanning kit for 15 kg animal hide, leather
$88.00$118.00 (-25%)
YOU HAVE TO DILUTE 1 litre CONCENTRATED TANNING SOLUTION
WITH WATER TO 72 LITRE
TO MAKE READY TANNING BATH
FOR TANNING OF 12-15 kg WET ANIMAL HIDE
( about 35 - 40 rabbits or 20 - 25 fox, 1- 2 cow )
TANNING PROCESS:
( 1 litre concentrate )
To prepare a freshly skinned hide for tanning use a fine salt (cooking salt) sprinkled generously over the whole fleshy surface of the hide in the first few hours after skinning the animal the hide should then be rolled or folded up in such a way as to allow for the draining of fluids from the hide. No more than 24 hours later repeat the above step and then store the hide in a dry but ventilated place where it should be left for a week or so as it will become easier to flesh. Before fleshing the hide remove surface salt and stretch out the hide as much as possible. After making sure that all the fat and pieces of meat ,veins are removed from the reverse side(to hair) of the hide by scraping parallel to the skin surface so as not to cut into the skin structure, wash the skin thoroughly in water.
Prepare a large container(do not use any metal containers) suitable for the size of the hide with 72liters (20 gallons ) of rain or soft water in it mix 3.6kg ( 7 pound ) of fine table salt than add 1 liter of “traditional tanning formula” and mix well before immersing the hide in the container.
A mixture such as this from 1 liter of traditional tanning formula will tan about 12 – 15 kg (24 - 30 pounds )of wet weight skin. Immerse the hide and stir and agitate with a piece of wood as often as possible once every few hours for about three days. To check if the hide is ready make a 5cm ( 2 “ ) cut about 1cm ( ½ “ ) from the edge and check that the skin is green throughout the whole thickness of the hide.
If it is not continue tanning the hide until it turns green. If it is green then the tanning Process is finished. Save the mixture as it can be reused by adding more traditional tanning formula. Rinse the hide in a barrel of cold water for about half an hour then drain the hide.
Repeat this rinsing process two more times. Then let it drain for 24 hours on a line or pole. After it has drained apply a fat liquor to the flesh side of the skin and let it soak in. Repeat application. Nail the hide on to a board with the flesh side up in a dry cool place for 1-2 days . When the hide is still slightly damp draw flesh side of skin over a table or log until it becomes soft and easy to fold, let it dry.
Mixing ratio: 1 litre concentrate tanning dilute 72 litres , plus ad 3.6 kg table salt, it is enough to tan 12 - 15 kg wet hide
0.5 litre concentrate tanning dilute 36 litre, plus 1.8 kg table salt, it is enough to tan 6 - 7 kg wet hide
0.2 litre concentrate tanning dilute 14 litre plus 0.7 kg table salt, it is enough to tan 1.5 - 2 kg wet hide
tem specifics
-
Condition
-
-
Brand
-
A1bit
-
Type
-
Tanning Kit
-
Custom Bundle
-
No
-
Model
-
KIT
-
MPN
-
TANKIT-1000
-
Modified Item
-
No
-
UPC
-
Does not apply
Reviews
There are no reviews yet.